Samarium Cobalt (SmCo5 or Sm2Co17) and Neodymium-Iron-Boron (Nd2Fe14B) are both Rare Earth Magnets –the strongest known rare earth permanent magnets. Samarium cobalt magnets are a variety of rare earth magnet that delivers exceptional power while maintaining excellent resistance to severe temperatures and corrosion. Samarium cobalt magnets are able to perform over a wider temperature range than neodymium magnets, and deliver comparable performance in terms of strength.

Samarium Cobalt magnets fall into the following groups:

Samarium Cobalt magnets Series 1-5 (SmCo5)

These samarium cobalt magnet alloys have one atom of rare earth Samarium and five atoms of Cobalt. By weight this samarium cobalt magnet alloy will typically contain 36% Samarium with the balance Cobalt. The energy products of these samarium cobalt alloys range from 16 MGOe to 25 MGOe. These Samarium Cobalt magnets generally have a reversible temperature coefficient of -0.05%/°C. Saturation magnetization can be achieved with a moderate magnetizing field. This series of Samarium Cobalt magnet is easier to calibrate to a specific magnetic field than the SmCo 2-17 series magnets.

In the presence of a moderately strong magnetic field, unmagnetized magnets of this series will try to align its orietation axis to the magnetic field. Unmagnetized magnets of this series when exposed to moderately strong fields will get slightly magnetized. This can be an issue if post processing requires that the magnet be plated or coated. The slight field that the magnet picks up can attract debris during the plating or coating process causing for a potential plating or coating failure or a mechanically out of tolerance condition.

Machining or grinding this magnet by the user is discouraged. This material must be ground using diamond cutting and grinding tools and a significant amount of water based coolant. Dry ground powder can iqnite spontaneously with a small spark.

The coercivity is controlled by a process known as 'nucleation'. S1665, S1865, S2064, S2065 and S2069 are Samarium Cobalt magnet alloys made from the Series 1-5 alloy.

Samarium Cobalt magnets Series 2-17 (Sm2Co17)

These Samarium Cobalt magnet alloys are an age hardening type with a composition of two atoms of rare earth Samarium Cobalt and 13-17 atoms of transition metals (TM). The TM content is rich in cobalt, but contains other elements such as iron and copper. Other elements like zirconium, hafnium and such may be added in small quantities to achieve better heat treatment response. By weight the alloy will generally contain 25% of Samarium. The maximum energy products of these alloys range from 20 MGOe to 32 MGOe. These alloys have the best reversible temperature coefficient of all rare earth alloys, typically being -0.03%/°C. The 'second generation' Samarium Cobalt materials can also be used at higher temperatures. The most advanced Samarium Cobalt material offered by MCE is S3069 which has a guaranteed maximum energy product of 29.5 MGOe minimum. All the SmCo alloys with energy products that are 22 MGOe and higher that MCE offers are made from the Series 2-17 alloy.

Bonded Samarium Cobalt

The bonded samarium cobalt materials are typically anisotropic and manufactured by using 'binders' such as epoxy resins to hold the powder in place, rather than 'sintering' the alloy. Energy products of the bonded magnet range from 5 MGOe to 15.1 MGOe. MCE offers two grades of the bonded samarium cobalt material.

Cached

Sintered Samarium Cobalt

Sintered Samarium Cobalt magnets are inherently very brittle, and conventional machining techniques cannot be used. If machining is required, high concentration diamond grinding wheels must be used, and water coolant is necessary. The grinding dust produced from machining Samarium Cobalt is a fire hazard when dry since it can reach an ignition point at low temperatures. Samarium Cobalt powder can spontaneously ignite from just a small electrostatic spark.

Sintered Samarium Cobalt magnets, similar to other magnet materials, are formulated for their magnetic properties and not their mechanical properties. As such, they must not be used as mechanical members, or expect to exhibit superior mechanical characteristics. As with sintered metullurgy, one should expect to find imperfections such as minor hairline cracks, porosity, voids, cold flow, shrinkage, pipe and others such as commonly found in cast or sintered metallic magnets.

Magnetizing Samarium Cobalt

Magnetizing Samarium Cobalt magnet materials require very large magnetizing fields to saturate the material. Fields in excess of 35,000 Oersteds should be used. In the event the Samarium Cobalt magnet is inside an assembly and magnetized post assembly, greater fields are required to ensure saturation.

Videos For Samarium Cobalt

Using Samarium Cobalt Magnets

Generally, Samarium Cobalt magnets do not need any coatings or platings after processing. Occasionally coating with advanced coatings such as PR1010 is desirable if cleanliness is an issue. The coating in this case acts much like a sealant. Oxidation is not a factor. Occasionally the Samarium Cobalt (SmCo) magnet may have some areas that discolor and appear as oxidation. This is typically due to some iron impurities and is generally not a cause for plating; the rusting appearance is typically localized in areas and after some discoloration, does not continue through the material.

Occassionally Samarium Cobalt magnets are plated with Nickel. This is generally done if the magnets are used in a vacuum so that a vacuum cleaning can be accomplished prior to assembly. It is easier to 'wipe down' a nickel plated Samarium Cobalt magnet than to try to clean an unplated magnet.

SmCo Magnet Manufacturers – Buy Samarium Cobalt Magnets From Factory

China Magnets Source Material Limited is a SmCo magnet manufacturers. With many years’ experience in magnet production, we can provide high quality samarium cobalt ring magnets, samarium cobalt disc magnets, samarium cobalt block magnets, smco pot magnet and arc SmCo magnets.

Samarium Cobalt Magnets Properties

Compared to NdFeB magnets, SmCo magnets offers unique capabilities such as higher energy density at elevated temperatures. Their maximum operating temperature is ≥250 °C, which strongly exceed those of NdFeB permanent magnets. SmCo flux output varies much less with respect to temperature, meaning the device performance can truly be optimized. Click and find SmCo Magnet Grades here.

Industrial Uses of Magnets

Therefore, we usually use SmCo magnets for high-temperature applications, such as turbomachinery, motor rotors of high-end electric cars and magnetic agitator drives. Samarium cobalt block in grade of Sm2Co17 is also very common in the laboratory for scientific research project or experimental study. For eaxample, CERN use our magnet on accelerator.

Samarium Cobalt Magnet Price

Samarium Cobalt Ignition

Another difference with NdFeB magnets is that the supply risk and price instability of SmCo magnets do not depend on the rare-earth element – Sm, but rather on the cobalt in the magnet alloy. Therefore, the price of Samarium Cobalt block material is more stable.

SmCo Magnet Manufacturers

As smco5 & sm2co17 magnet manufacturer, we supply Samarium Cobalt for mass production at factory price. But we also custom smco magnets for prototype development and low-volume production.

Are you interested in learning more about what we have to offer you? We are more than happy to provide additional information about our magnetic products. For product pricing details, ordering information, or any other questions you have, contact us through the form below.
Please be sure to include your name, email and the specific product in question. You will receive a confirmation after submitting the form, and we will respond as quickly as possible for your satisfaction.